Skip to content
English
  • There are no suggestions because the search field is empty.

SonicWALL Security Appliance Configuration Guide

Confirming Platform Details

Before proceeding with the configuration guide please complete the following steps so you have the required information to complete the guide.

  1. Login to your Marketing4WiFi dashboard
  2. Using the navigation panel to the left, select Settings ➡️ Customizations
    1. Splashpage hostname: Find your splashpage hostname and save it for use later in this guide.
    2. Platform Environment: Find your environment and then use the table below to determine your RADIUS Servers for use later in this guide.
      Environment RADIUS Server 1 RADIUS Server 2
      US-A 52.23.46.139 52.207.192.243 
      US-B 3.132.31.3  3.18.137.68 

       

  3. Using the navigation panel to the left select Network ➡️ Hotspots
  4. Click the Edit icon for the hotspot you wish to configure using this guide. 
  5. Scroll to the bottom of the page to find the Gateway Details section. 
    1. NAS-ID: Save this for use later in this guide.
    2. RADIUS Secret: Save this for use later in this guide.

The following instructions outline how to configure a SonicWALL network for the Smart WiFI Platform. This guide covers details such as configuring RADIUS, address objects, and user, zone, and interface settings. This guide assumes that your SonicWALL appliance is already operational. Please make sure any firewall rules, web content filters, and other security measures have been configured to interface with the platform.


SonicOS 7.3.2+ warning

If you are using SonicOS 7.3.2 or above you must complete the following checklist before completing the configuration guide.

  1. In  the Firewall Administration settings, under the SonicOS API tab, the SonicOS API and RFC-2617 HTTP Basic Access authentication toggles must be ON.
  2. https management on the guest interface must be enabled (Do not enter anything into the domain name field) 
  3. A valid and trusted certificate must be imported into the firewall's certificate store and bound to the guest interface
  4. Create a local DNS entry to point the cert name to the gateway of the guest interface

Adding Gateways to your Hotspot

  1. Login to your GoZone Marketing4WiFi dashboard
  2. Using the navigation panel to the left, select Network ➡️ Gateways
  3. Click the Add Gateway option to the top right
    1. Select Hotspot: Select your desired hotspot
    2. Gateway Name: Enter a name for this SonicWall network
    3. Gateway Type: SonicWall
    4. MAC Address: Enter the Unique Firewall ID (LAN MAC address)
      1. Press the blue + icon to the right of MAC Address
      2. Enter the WAN interface MAC address
    5. IP Address:Enter the interface IP that guest users have as their default gateway (on the firewall)
    6. Hostname: Leave blank unless you have configured your network to use a certificate you provided. 
    7. Enable SonicOS API: This must be enabled if you're using SonicOS 7.3.2 or above and when enabled a Hostname value will be required.
  4. Press Submit
  5. This completes the Gateway creation portion of this guide

Configuring your SonicWALL appliance

  1. Login to your SonicWALL appliance.
  2. Click Manage at the top.
  3. On the menu to the left, click on VPN ➡️ Base Setting. The Unique Firewall Identifier must match the original serial number of the device as displayed on the licenses page.
  4. On the menu to the left, click on Users ➡️ Settings
    1. Click on the Authentication option at the top and configure with:
        • User authentication method: RADIUS + Local users
        • Click the Configure RADIUS button.
          1. On the RADIUS Servers Settings page, click ADD
            • Hostname or IP Address: Enter your RADIUS Server 1 from the Confirming Platform Details portion of this guide.
            • Port: 1812
            • Shared Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide.
            • Confirm Shared Secret: Repeat secret
            • Advanced Tab- User Name Format: Name@Domain
            • Click Save
          2. On the RADIUS Servers Settings page, click ADD again
            • Hostname or IP Address: Enter your RADIUS Server 2 from the Confirming Platform Details portion of this guide.
            • Port: 1812
            • Shard Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide.
            • Confirm Shared Secret: Repeat secret
            • Advanced Tab- User Name Format: Name@Domain
            • Click Save
          3. On the RADIUS Servers Setting page, click the RADIUS users option at the top
            • Default user group to which all RADIUS users belong: Guest Services
          4. Click OK to save.
    2. On the User Settings page again, click the Accounting option at the top and then click RADIUS Accounting
      1. On the RADIUS Accounting Servers Settings page, click ADD
        • Hostname or IP Address: Enter your RADIUS Server 1 from the Confirming Platform Details portion of this guide.
        • Port: 1813
        • Shard Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide.
        • Confirm Shared Secret: Repeat secret
        • Advanced Tab- User Name Format: Name@Domain
        • Click Save
      2. On the RADIUS Accounting Servers Settings page, click ADD again
        • Hostname or IP Address:Enter your RADIUS Server 2 from the Confirming Platform Details portion of this guide.
        • Port: 1813
        • Shard Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide.
        • Confirm Shared Secret: Repeat secret
        • Advanced Tab- User Name Format: Name@Domain
        • Click Save
      3. On the RADIUS Accounting Servers Settings page, click the User Accounting option at the top
        • Send accounting data for: Guest Users
        • Include: Domain and local users
        • Send interim updates: 10 minutes
      4. Click OK
    3. On the User Settings page again, click the User Settings option at the top
      • Enable login session limit for web logins: Unchecked
    4. On the User Settings page again, click Accept at the bottom to save changes.
  5. On the menu to the left, click Objects ➡️ Address Objects.
    1. Click the Add button at the top to create an Address Object. Using the template below as an example you will need to create an Address Object for every default walled garden entry for the integrations intended for use with this hotspot.
      • Name:
      • Zone Assignment: WAN
      • Type: FQDN
      • FQDN Hostname: *.exampledomain.com
    2. Once all the required Address Object entries have been created, click the Address Groups option at the top of the page.
    3. Click the Add button at the top to create an Address Group.
      • Name: SmartWiFi
      • Use the ➡️ arrow to move every entry you just created into the group.
      • Click OK to save.
  6. On the menu to the left, click on Network ➡️ Zones and edit the zone you want to enable the captive portal on.
    1. Click on the Guest Services option at the top
    2. Click the checkbox for Enable Captive Portal Authentication and click Configure
      • External Captive Portal URL: Enter the Splashpage hostname collected during the Confirming Platform details section of this guide and then add /hotspotlogin.php
        • Example: https://splash.smartwifiplatform.com/hotspotlogin.php
      • Captive Portal Welcome URL Source: Custom
      • Custom Captive Portal Welcome URL: Enter the Splashpage hostname collected during the Confirming Platform details section of this guide and then add /hotspotlogin.php?res=success
        • Example: https://splash.smartwifiplatform.com/hotspotlogin.php?res=success
      • Session Timeout Source: From RADIUS
      • Idle Timeout Source: From RADIUS
      • RADIUS Authentication Method: CHAP
      • Click OK to save.
    3. Click the checkbox for Pass Networks and select SmartWiFi
    4. Change the MAX guest option to a suitable concurrent number of authorized guest sessions for your network.
    5. Click OK to save.
  7. Click OK to save the Zone.

Hardware dependent features

  •  This integration does not support the platform’s Session Profile values for Download/Upload speed. This means bandwidth throttling is not set by the platform when a guest connects to a hotspot using any login method, including Guest Plans and Ad-Based.
  • This integration does not support Presence/Proximity data. This means Presence Campaigns can not be configured for a hotspot utilizing this hardware. Standard Smart Campaign rules are still supported.
  • This integration does not support the SecurePass™ module. This means a hotspot utilizing this hardware can not provide dynamically generated wifi passwords to guests who purchase a Guest Plan.  
  • This integration utilizes an HTTP post to initiate authentication by default. This means devices interacting with the splash page on a full feature browser will likely be displayed an HTTP Browser Post warning after clicking the connect button.

Troubleshooting Tips

  • If a hotspot deactivated message is presented please ensure all the AP MACs have been added as gateways to the correct hotspot.
  • If devices are redirected to the splash page URL but the page fails to load please ensure the Address Group has been correctly configured and assigned to the Pass Networks option.
  • If you load the splash page but are presented a "Bad Request" error page, please ensure the steps outlined in the "SonicOS 7.3.2+ warning" section of this guide have been completed and you're Gateway in the dashboard has "Enable SonicOS API" turned on.

LIMITED HARDWARE SUPPORT: Hardware manufacturers frequently make changes to firmware, controllers and GUI’s. The information below may be out of date or images may be different and is to be used as a general reference guide. We do offer additional limited support to help with trouble-shooting and we highly recommend that you have a hardware support agreement and/or access to a hardware support engineering representative from the manufacturer.

This equipment has been integrated and tested in our labs with the MarketingWiFiPlatform using the firmware versions below.

  • SonicOS 7.3.3
  • SonicOS 6.5.4.11-97n