Skip to content
English
  • There are no suggestions because the search field is empty.

Cisco Meraki Configuration

Confirming Platform Details

Before proceeding with the configuration guide please complete the following steps so you have the required information to complete the guide.

  1. Login to your Marketing4WiFi dashboard
  2. Using the navigation panel to the left, select Settings ➡️ Customizations
    1. Splashpage hostname: Find your splashpage hostname and save it for use later in this guide.
    2. Platform Environment: Find your environment and then use the table below to determine your RADIUS Servers for use later in this guide.
      Environment RADIUS Server 1 RADIUS Server 2
      US-A 52.23.46.139 52.207.192.243 
      US-B 3.132.31.3  3.18.137.68 

       

  3. Using the navigation panel to the left select Network ➡️ Hotspots
  4. Click the Edit icon for the hotspot you wish to configure using this guide.
  5. Scroll to the bottom of the page to find the Gateway Details section. 
    1. NAS-ID: Save this for use later in this guide.
    2. RADIUS Secret: Save this for use later in this guide.

The following instructions outline how to setup a Cisco Meraki network for the Smart WiFi Platform. Additional Cisco options may need to be enabled before you're able to configure completely.


Adding Gateways to your Hotspot

  1. Login to your GoZone Marketing4WiFi dashboard
  2. Using the navigation panel to the left, select Network ➡️ Gateways
  3. Click the Add Gateway option to the top right
    1. Select Hotspot: Select your desired hotspot
    2. Gateway Name: Enter any name for this gateway
    3. Gateway Type: Cisco Mearki
    4. MAC Address: Enter the MAC of any AP that will broadcast the Guest WiFi
  4. Press Submit
  5. This completes the Gateway creation portion of this guide

Cisco Meraki Dashboard

  1. Login to your Cisco Meraki Dashboard and select your desired Network.
  2. Using the menu panel to the left, select: Wireless ➡️ Configure ➡️ Access Control.
  3. Select the SSID to be configured to a Smart WiFi Platform.
    1. SSID (name): Guest WiFi (or whatever you wish)
      Please do not use any apostrophes in your SSID as it will cause an issue with Authentication.
    2. SSID Status: Enabled
    3. Security: Open (no Encryption)
    4. Splash Page: Sign-on with my RADIUS server
    5. Open the section for Advanced splash settings section
    6. Captive Portal Strength: Block all access until sign-on is complete
    7. Walled Garden: Enabled
    8. Walled Garden Ranges: Enter the required  whitelist entries based on the sign on products intended for use with this hotspot.
      Example: *.smartwifiplatform.com 
    9. Open the RADIUS section
    10. In the RADIUS Servers section, press the Add server button twice to create a total of two RADIUS servers. Configure with-
      • Host 1: Enter your RADIUS Server 1 from the Confirming Platform Details portion of this guide. 
      • Port: 1812
      • Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide. 
      • Host 2: Enter your RADIUS Server 2 from the Confirming Platform Details portion of this guide. 
      • Port: 1812
      • Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide. 
      • Press Done on both servers
    11. In the RADIUS accounting servers section, press the Add server button twice to create a total of two RADIUS accounting servers. Configure with-
      NOTE: If you do NOT see this menu option then you will need to open a case with Meraki support and ask them to enable this feature for you. Simply ask, "Please enable RADIUS Accounting for this network.
      • Host 1: Enter your RADIUS Server 1 from the Confirming Platform Details portion of this guide. 
      • Port: 1813
      • Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide. 
      • Host 2: Enter your RADIUS Server 2 from the Confirming Platform Details portion of this guide. 
      • Port: 1813
      • Secret: Enter your RADIUS Secret from the Confirming Platform Details portion of this guide. 
      • Press Done on both servers
    12. RADIUS Testing: disabled
    13. Data-carrier detect: Disabled
    14. Press Save
  4. Using the menu panel to the left, select: Wireless ➡️ Splash Page.
    1. Select the SSID configured access control rules for in step 3.
    2. Custom Splash URL: Enabled- Enter the Splashpage hostname collected during the Confirming Platform details section of this guide and then add /hotspotlogin.php
      • Example: https://splash.smartwifiplatform.com/hotspotlogin.php
    3. Splash Behavior: A Different URL: Enabled- Enter the Splashpage hostname collected during the Confirming Platform details section of this guide and then add /hotspotlogin.php?res=success
      • Example: https://splash.smartwifiplatform.com/hotspotlogin.php?res=success
    4. Press Save Changes
  5. The configuration is complete.

Hardware dependent features

  • This integration supports the platform’s Session Profile values for Download/Upload speed. This means bandwidth throttling is set by the platform when a guest connects to a hotspot using any login method, including Guest Plans and Ad-Based.
  • This integration supports Presence/Proximity data. This means Presence Campaigns can be configured for a hotspot utilizing this hardware.
  • This integration supports the SecurePass™ module. This means a hotspot utilizing this hardware can provide dynamically generated wifi passwords to guests who purchase a Guest Plan.
  • This integration utilizes an HTTPs post to initiate authentication by default. This means devices interacting with the splash page on a full feature browser should not be displayed an HTTP Browser Post warning after clicking the connect button.

Troubleshooting Tips

  • If a hotspot deactivated message is presented please ensure all the AP MACs have been added as gateways to the correct hotspot.
  • If devices are redirected to the splash page URL but the page fails to load please ensure the Address Group has been correctly configured and assigned to the Pass Networks option.
  • If devices are redirected back to the splash page after pressing the connect button please ensure you have entered the correct RADIUS details.

LIMITED HARDWARE SUPPORT: Hardware manufacturers frequently make changes to firmware, controllers and GUI’s. The information below may be out of date or images may be different and is to be used as a general reference guide. We do offer additional limited support to help with trouble-shooting and we highly recommend that you have a hardware support agreement and/or access to a hardware support engineering representative from the manufacturer.

This equipment has been integrated and tested in our labs with the MarketingWiFi Platform using the firmware versions below.

  1. MR 30.7.1